DR-PRO Wire Cable Replacement Steps

Preparation Tools

  • Jump rope handle
  • Wire cable
  • Hexagonal wrench (1.5 to 1.6 mm diagonal) *You can use the supplied wrench or your own wrench. Please check the specifications carefully before use.

    Steps

    (1) Check the wire condition

    If the tip of the wire cable is damaged, please cut that particular part with a wire cutter. ignored, the wire cable cannot be secured even if the screws are tightened.

    (2) Loosen the screws

    Make sure all screws are loosened.

    (3) Attach the wire cable

    Insert the wire cable firmly into the hole till the end.

    (4) Tighten the screws

    Use the long handle of the L-shaped wrench to lightly tighten both screws clockwise first. This could prevent damages to the screw holes.

    (5) Final adjustment of the screws

    Use the short handle of the L-shaped wrench, lightly press towards the screws and tighten them till the end. 

    (6) Confirmation of the replacement

    Pull the wire cable lightly by hand to check if it does not come off. If it comes off, start over from step 1. If it still does not work, please do not hesitate to contact us.

    Translated with DeepL.com (free version)